 |
 F20C/F22C S2000 |
 |
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Strengthened chrome molly I section connecting-rods are included. |
|
| F20C/F22C (S2000) Increased Capacity 2400KIT NA I Type High Comp |
Engine Type |
F20C/F22C 2400KIT-I (2378) |
F20C/F22C 2400KIT-I (2405) |
| Part No. |
13001-F20-400-I |
13001-F20-401-I |
| Price (set) |
¥830,000 |
¥830,000 |
| Bore×Stroke |
ø87.00×100mm |
ø87.50×100mm |
| Displacement |
2378cc |
2405cc |
| Crown Volume *1 |
-0.56cc/5.38cc |
-0.56cc/5.45cc |
| Projection Height |
+1.0mm (from the deck of the block) |
+1.0mm (from the deck of the block) |
| Reference C/R *2 |
Standard head GK t=0.6mmξ≈12.12:1 |
Standard head GK t=0.6mmξ≈12.27:1 |
Based on standard piston pin diameter.
*1:Crown volume is measured "from the piston shoulder"/"from the deck of the block".
*2:The compression ratio given above are only to be taken as a guide, measurements are required. |
|
|
| F20C/F22C (S2000) Increased Capacity 2400KIT NA I Type Ultra High Comp |
Engine Type |
F20C/F22C 2400KIT-IH (2378) |
F20C/F22C 2400KIT-IH (2405) |
| Part No. |
13001-F20-400-IH |
13001-F20-401-IH |
| Price (set) |
¥830,000 |
¥830,000 |
| Bore×Stroke |
ø87.00×100mm |
ø87.50×100mm |
| Displacement |
2378cc |
2405cc |
| Crown Volume *1 |
3.3cc/9.2cc |
3.3cc/9.3cc |
| Projection Height |
+1.0mm (from the deck of the block) |
+1.0mm (from the deck of the block) |
| Reference C/R *2 |
Standard head GK t=0.6mmξ≈13.0:1 |
Standard head GK t=0.6mmξ≈13.2:1 |
Based on standard piston pin diameter.
*1:Crown volume is measured "from the piston shoulder"/"from the deck of the block".
*2:The compression ratio given above are only to be taken as a guide, measurements are required. |
|
|
|
|
|
